SqMod/vendor/ZMQ/tests/test_immediate.cpp

/* SPDX-License-Identifier: MPL-2.0 */

#include "testutil.hpp"
#include "testutil_unity.hpp"

SETUP_TEARDOWN_TESTCONTEXT

void test_immediate_1 ()
{
    int val;
    int rc;
    char buffer[16];
    size_t len = MAX_SOCKET_STRING;
    char my_endpoint[MAX_SOCKET_STRING];
    // TEST 1.
    // First we're going to attempt to send messages to two
    // pipes, one connected, the other not. We should see
    // the PUSH load balancing to both pipes, and hence half
    // of the messages getting queued, as connect() creates a
    // pipe immediately.

    void *to = test_context_socket (ZMQ_PULL);

    // Bind the one valid receiver
    val = 0;
    TEST_ASSERT_SUCCESS_ERRNO (
      zmq_setsockopt (to, ZMQ_LINGER, &val, sizeof (val)));
    bind_loopback_ipv4 (to, my_endpoint, len);

    // Create a socket pushing to two endpoints - only 1 message should arrive.
    void *from = test_context_socket (ZMQ_PUSH);

    val = 0;
    TEST_ASSERT_SUCCESS_ERRNO (
      zmq_setsockopt (from, ZMQ_LINGER, &val, sizeof (val)));
    // This pipe will not connect (provided the ephemeral port is not 5556)
    TEST_ASSERT_SUCCESS_ERRNO (zmq_connect (from, "tcp://localhost:5556"));
    // This pipe will
    TEST_ASSERT_SUCCESS_ERRNO (zmq_connect (from, my_endpoint));

    msleep (SETTLE_TIME);

    // We send 10 messages, 5 should just get stuck in the queue
    // for the not-yet-connected pipe
    for (int i = 0; i < 10; ++i) {
        send_string_expect_success (from, "Hello", 0);
    }

    // We now consume from the connected pipe
    // - we should see just 5
    int timeout = 250;
    TEST_ASSERT_SUCCESS_ERRNO (
      zmq_setsockopt (to, ZMQ_RCVTIMEO, &timeout, sizeof (int)));

    int seen = 0;
    while (true) {
        rc = zmq_recv (to, &buffer, sizeof (buffer), 0);
        if (rc == -1)
            break; //  Break when we didn't get a message
        seen++;
    }
    // TODO: this fails ~1% of the runs on OBS but it does not seem to be reproducible anywhere else
    if (seen == 0)
        TEST_IGNORE_MESSAGE (
          "Unreliable test occasionally fails on slow CIs, ignoring");
    TEST_ASSERT_EQUAL_INT (5, seen);

    test_context_socket_close (from);
    test_context_socket_close (to);
}


void test_immediate_2 ()
{
    // This time we will do the same thing, connect two pipes,
    // one of which will succeed in connecting to a bound
    // receiver, the other of which will fail. However, we will
    // also set the delay attach on connect flag, which should
    // cause the pipe attachment to be delayed until the connection
    // succeeds.

    // Bind the valid socket
    void *to = test_context_socket (ZMQ_PULL);
    size_t len = MAX_SOCKET_STRING;
    char my_endpoint[MAX_SOCKET_STRING];
    bind_loopback_ipv4 (to, my_endpoint, len);

    int val = 0;
    TEST_ASSERT_SUCCESS_ERRNO (
      zmq_setsockopt (to, ZMQ_LINGER, &val, sizeof (val)));

    // Create a socket pushing to two endpoints - all messages should arrive.
    void *from = test_context_socket (ZMQ_PUSH);

    val = 0;
    TEST_ASSERT_SUCCESS_ERRNO (
      zmq_setsockopt (from, ZMQ_LINGER, &val, sizeof (val)));

    // Set the key flag
    val = 1;
    TEST_ASSERT_SUCCESS_ERRNO (
      zmq_setsockopt (from, ZMQ_IMMEDIATE, &val, sizeof (val)));

    // Connect to the invalid socket
    TEST_ASSERT_SUCCESS_ERRNO (zmq_connect (from, "tcp://localhost:5561"));
    // Connect to the valid socket
    TEST_ASSERT_SUCCESS_ERRNO (zmq_connect (from, my_endpoint));

    // Send 10 messages, all should be routed to the connected pipe
    for (int i = 0; i < 10; ++i) {
        send_string_expect_success (from, "Hello", 0);
    }
    int timeout = 250;
    TEST_ASSERT_SUCCESS_ERRNO (
      zmq_setsockopt (to, ZMQ_RCVTIMEO, &timeout, sizeof (int)));

    int seen = 0;
    while (true) {
        char buffer[16];
        int rc = zmq_recv (to, &buffer, sizeof (buffer), 0);
        if (rc == -1)
            break; //  Break when we didn't get a message
        seen++;
    }
    TEST_ASSERT_EQUAL_INT (10, seen);

    test_context_socket_close (from);
    test_context_socket_close (to);
}

void test_immediate_3 ()
{
    // This time we want to validate that the same blocking behaviour
    // occurs with an existing connection that is broken. We will send
    // messages to a connected pipe, disconnect and verify the messages
    // block. Then we reconnect and verify messages flow again.
    void *backend = test_context_socket (ZMQ_DEALER);
    void *frontend = test_context_socket (ZMQ_DEALER);

    int zero = 0;
    TEST_ASSERT_SUCCESS_ERRNO (
      zmq_setsockopt (backend, ZMQ_LINGER, &zero, sizeof (zero)));
    TEST_ASSERT_SUCCESS_ERRNO (
      zmq_setsockopt (frontend, ZMQ_LINGER, &zero, sizeof (zero)));

    //  Frontend connects to backend using IMMEDIATE
    int on = 1;
    TEST_ASSERT_SUCCESS_ERRNO (
      zmq_setsockopt (frontend, ZMQ_IMMEDIATE, &on, sizeof (on)));

    size_t len = MAX_SOCKET_STRING;
    char my_endpoint[MAX_SOCKET_STRING];
    bind_loopback_ipv4 (backend, my_endpoint, len);

    TEST_ASSERT_SUCCESS_ERRNO (zmq_connect (frontend, my_endpoint));

    //  Ping backend to frontend so we know when the connection is up
    send_string_expect_success (backend, "Hello", 0);
    recv_string_expect_success (frontend, "Hello", 0);

    // Send message from frontend to backend
    send_string_expect_success (frontend, "Hello", ZMQ_DONTWAIT);

    test_context_socket_close (backend);

    //  Give time to process disconnect
    msleep (SETTLE_TIME * 10);

    // Send a message, should fail
    TEST_ASSERT_FAILURE_ERRNO (EAGAIN,
                               zmq_send (frontend, "Hello", 5, ZMQ_DONTWAIT));

    //  Recreate backend socket
    backend = test_context_socket (ZMQ_DEALER);
    TEST_ASSERT_SUCCESS_ERRNO (
      zmq_setsockopt (backend, ZMQ_LINGER, &zero, sizeof (zero)));
    TEST_ASSERT_SUCCESS_ERRNO (zmq_bind (backend, my_endpoint));

    //  Ping backend to frontend so we know when the connection is up
    send_string_expect_success (backend, "Hello", 0);
    recv_string_expect_success (frontend, "Hello", 0);

    // After the reconnect, should succeed
    send_string_expect_success (frontend, "Hello", ZMQ_DONTWAIT);

    test_context_socket_close (backend);
    test_context_socket_close (frontend);
}

int main (void)
{
    setup_test_environment ();
    UNITY_BEGIN ();
    RUN_TEST (test_immediate_1);
    RUN_TEST (test_immediate_2);
    RUN_TEST (test_immediate_3);
    return UNITY_END ();
}