[Info-ZIP note, 970311:  this file is based on PKWARE's appnote.txt of
 15 February 1996.  It has been unofficially corrected and extended by
 Info-ZIP without explicit permission by PKWARE.  Although Info-ZIP
 believes the information to be accurate and complete, it is provided
 under a disclaimer similar to the PKWARE disclaimer below, differing
 only in the substitution of "Info-ZIP" for "PKWARE".  In other words,
 use this information at your own risk, but we think it's correct.  As
 of PKZIPW 2.50, two new incompatibilities have been introduced by PKWARE;
 they are noted below.  Note that the NTFS "conflict" is currently not
 real; PKZIPW 2.50 actually tags NTFS files as having come from a FAT
 file system, too.]


Disclaimer
----------

Although PKWARE will attempt to supply current and accurate
information relating to its file formats, algorithms, and the
subject programs, the possibility of error can not be eliminated.
PKWARE therefore expressly disclaims any warranty that the
information contained in the associated materials relating to the
subject programs and/or the format of the files created or
accessed by the subject programs and/or the algorithms used by
the subject programs, or any other matter, is current, correct or
accurate as delivered.  Any risk of damage due to any possible
inaccurate information is assumed by the user of the information.
Furthermore, the information relating to the subject programs
and/or the file formats created or accessed by the subject
programs and/or the algorithms used by the subject programs is
subject to change without notice.


General Format of a ZIP file
----------------------------

  Files stored in arbitrary order.  Large zipfiles can span multiple
  diskette media.

  Overall zipfile format:

    [local file header + file data + data_descriptor] . . .
    [central directory] end of central directory record


  A.  Local file header:

	local file header signature     4 bytes  (0x04034b50)
	version needed to extract       2 bytes
	general purpose bit flag        2 bytes
	compression method              2 bytes
	last mod file time              2 bytes
	last mod file date              2 bytes
	crc-32                          4 bytes
	compressed size                 4 bytes
	uncompressed size               4 bytes
	filename length                 2 bytes
	extra field length              2 bytes

	filename (variable size)
	extra field (variable size)


  B.  Data descriptor:

	data descriptor signature	4 bytes  (0x08074b50)
	crc-32                          4 bytes
	compressed size                 4 bytes
	uncompressed size               4 bytes

      This descriptor exists only if bit 3 of the general
      purpose bit flag is set (see below).  It is byte aligned
      and immediately follows the last byte of compressed data.
      This descriptor is used only when it was not possible to
      seek in the output zip file, e.g., when the output zip file
      was standard output or a non seekable device.

  C.  Central directory structure:

      [file header] . . .  end of central dir record

      File header:

	central file header signature   4 bytes  (0x02014b50)
	version made by                 2 bytes
	version needed to extract       2 bytes
	general purpose bit flag        2 bytes
	compression method              2 bytes
	last mod file time              2 bytes
	last mod file date              2 bytes
	crc-32                          4 bytes
	compressed size                 4 bytes
	uncompressed size               4 bytes
	filename length                 2 bytes
	extra field length              2 bytes
	file comment length             2 bytes
	disk number start               2 bytes
	internal file attributes        2 bytes
	external file attributes        4 bytes
	relative offset of local header 4 bytes

	filename (variable size)
	extra field (variable size)
	file comment (variable size)

      End of central dir record:

	end of central dir signature    4 bytes  (0x06054b50)
	number of this disk             2 bytes
	number of the disk with the
	start of the central directory  2 bytes
	total number of entries in
	the central dir on this disk    2 bytes
	total number of entries in
	the central dir                 2 bytes
	size of the central directory   4 bytes
	offset of start of central
	directory with respect to
	the starting disk number        4 bytes
	zipfile comment length          2 bytes
	zipfile comment (variable size)


  D.  Explanation of fields:

      version made by (2 bytes)

	  The upper byte indicates the host system (OS) for the
	  file.  Software can use this information to determine
	  the line record format for text files etc.  The current
	  mappings are:

	  0 - FAT file system (DOS, OS/2, NT)         + PKZIPW 2.50 VFAT, NTFS
	  1 - Amiga
	  2 - VMS (VAX or Alpha AXP)
	  3 - Unix
	  4 - VM/CMS
	  5 - Atari
	  6 - HPFS file system (OS/2, NT 3.x)
	  7 - Macintosh
	  8 - Z-System
	  9 - CP/M
	  10 - TOPS-20                           [supposedly PKZIPW 2.50 NTFS]
	  11 - NTFS file system (NT)
	  12 - SMS/QDOS
	  13 - Acorn RISC OS
	  14 - VFAT file system (Win95, NT)
	  15 - MVS
	  16 - BeOS (BeBox or PowerMac)
	  17 - Tandem
	  18 thru 255 - unused

	  The lower byte indicates the version number of the
	  software used to encode the file.  The value/10
	  indicates the major version number, and the value
	  mod 10 is the minor version number.

      version needed to extract (2 bytes)

	  The minimum software version needed to extract the
	  file, mapped as above.

      general purpose bit flag: (2 bytes)

	  bit 0: If set, indicates that the file is encrypted.

	  (For Method 6 - Imploding)
	  bit 1: If the compression method used was type 6,
		 Imploding, then this bit, if set, indicates
		 an 8K sliding dictionary was used.  If clear,
		 then a 4K sliding dictionary was used.
	  bit 2: If the compression method used was type 6,
		 Imploding, then this bit, if set, indicates
		 an 3 Shannon-Fano trees were used to encode the
		 sliding dictionary output.  If clear, then 2
		 Shannon-Fano trees were used.

	  (For Method 8 - Deflating)
	  bit 2  bit 1
	    0      0    Normal (-en) compression option was used.
	    0      1    Maximum (-ex) compression option was used.
	    1      0    Fast (-ef) compression option was used.
	    1      1    Super Fast (-es) compression option was used.

	  Note:  Bits 1 and 2 are undefined if the compression
		 method is any other.

	  (For method 8)
	  bit 3: If this bit is set, the fields crc-32, compressed size
		 and uncompressed size are set to zero in the local
		 header.  The correct values are put in the data descriptor
		 immediately following the compressed data.

	  The upper three bits are reserved and used internally
	  by the software when processing the zipfile.  The
	  remaining bits are unused.

      compression method: (2 bytes)

	  (see accompanying documentation for algorithm
	  descriptions)

	  0 - The file is stored (no compression)
	  1 - The file is Shrunk
	  2 - The file is Reduced with compression factor 1
	  3 - The file is Reduced with compression factor 2
	  4 - The file is Reduced with compression factor 3
	  5 - The file is Reduced with compression factor 4
	  6 - The file is Imploded
	  7 - Reserved for Tokenizing compression algorithm
	  8 - The file is Deflated
	  9 - Reserved for enhanced Deflating
	 10 - PKWARE Date Compression Library Imploding

      date and time fields: (2 bytes each)

	  The date and time are encoded in standard MS-DOS format.
	  If input came from standard input, the date and time are
	  those at which compression was started for this data.

      CRC-32: (4 bytes)

	  The CRC-32 algorithm was generously contributed by
	  David Schwaderer and can be found in his excellent
	  book "C Programmers Guide to NetBIOS" published by
	  Howard W. Sams & Co. Inc.  The 'magic number' for
	  the CRC is 0xdebb20e3.  The proper CRC pre and post
	  conditioning is used, meaning that the CRC register
	  is pre-conditioned with all ones (a starting value
	  of 0xffffffff) and the value is post-conditioned by
	  taking the one's complement of the CRC residual.
	  If bit 3 of the general purpose flag is set, this
	  field is set to zero in the local header and the correct
	  value is put in the data descriptor and in the central
	  directory.

      compressed size: (4 bytes)
      uncompressed size: (4 bytes)

	  The size of the file compressed and uncompressed,
	  respectively.  If bit 3 of the general purpose bit flag
	  is set, these fields are set to zero in the local header
	  and the correct values are put in the data descriptor and
	  in the central directory.

      filename length: (2 bytes)
      extra field length: (2 bytes)
      file comment length: (2 bytes)

	  The length of the filename, extra field, and comment
	  fields respectively.  The combined length of any
	  directory record and these three fields should not
	  generally exceed 65,535 bytes.  If input came from
	  standard input, the filename is set to "-" (length one).


      disk number start: (2 bytes)

	  The number of the disk on which this file begins.

      internal file attributes: (2 bytes)

	  The lowest bit of this field indicates, if set, that
	  the file is apparently an ASCII or text file.  If not
	  set, that the file apparently contains binary data.
	  The remaining bits are unused in version 1.0.

      external file attributes: (4 bytes)

	  The mapping of the external attributes is
	  host-system dependent (see 'version made by').  For
	  MS-DOS, the low order byte is the MS-DOS directory
	  attribute byte.  If input came from standard input, this
	  field is set to zero.

      relative offset of local header: (4 bytes)

	  This is the offset from the start of the first disk on
	  which this file appears, to where the local header should
	  be found.

      filename: (Variable)

	  The name of the file, with optional relative path.
	  The path stored should not contain a drive or
	  device letter, or a leading slash.  All slashes
	  should be forward slashes '/' as opposed to
	  backwards slashes '\' for compatibility with Amiga
	  and Unix file systems etc.  If input came from standard
	  input, the file name is set to "-" (without the quotes).

      extra field: (Variable)

	  This is for future expansion.  If additional information
	  needs to be stored in the future, it should be stored
	  here.  Earlier versions of the software can then safely
	  skip this file, and find the next file or header.  This
	  field will be 0 length in version 1.0.

	  In order to allow different programs and different types
	  of information to be stored in the 'extra' field in .ZIP
	  files, the following structure should be used for all
	  programs storing data in this field:

	  header1+data1 + header2+data2 . . .

	  Each header should consist of:

	    Header ID - 2 bytes
	    Data Size - 2 bytes

	  Note: all fields stored in Intel low-byte/high-byte order.

	  The Header ID field indicates the type of data that is in
	  the following data block.

	  Header ID's of 0 thru 31 are reserved for use by PKWARE.
	  The remaining ID's can be used by third party vendors for
	  proprietary usage.

	  The current Header ID mappings are:

	  0x0007        AV Info
	  0x0009        OS/2 extended attributes
	  0x000c        PKWARE VAX/VMS
	  0x000d        reserved for Unix
	  0x07c8        Info-ZIP Macintosh
	  0x2605        ZipIt Macintosh
	  0x4341        Acorn/SparkFS (David Pilling)
	  0x4453	Windows NT security descriptor (binary ACL)
	  0x4704        VM/CMS
	  0x470f        MVS
	  0x4b46        FWKCS MD5 (third party, see below)
	  0x4c41        OS/2 access control list (text ACL)
	  0x4d49        Info-ZIP VMS (VAX or Alpha)
	  0x5356        AOS/VS (binary ACL)
	  0x5455        extended timestamp
	  0x5855        Info-ZIP Unix (original; also OS/2, NT, etc.)
	  0x6542        BeOS (BeBox, PowerMac, etc.)
	  0x756e        ASi Unix
	  0x7855        Info-ZIP Unix (new)
	  0xfb4a        SMS/QDOS

	  The Data Size field indicates the size of the following
	  data block. Programs can use this value to skip to the
	  next header block, passing over any data blocks that are
	  not of interest.

	  Note: As stated above, the size of the entire .ZIP file
		header, including the filename, comment, and extra
		field should not exceed 64K in size.

	  In case two different programs should appropriate the same
	  Header ID value, it is strongly recommended that each
	  program place a unique signature of at least two bytes in
	  size (and preferably 4 bytes or bigger) at the start of
	  each data area.  Every program should verify that its
	  unique signature is present, in addition to the Header ID
	  value being correct, before assuming that it is a block of
	  known type.

	  In the following descriptions, note that "Short" means two bytes
	  and "Long" means four bytes, regardless of their native sizes.


	 -OS/2 Extended Attributes Extra Field:
	  ====================================

	  The following is the layout of the OS/2 extended attributes "extra"
	  block.  (Last Revision 960922)

	  Note: all fields stored in Intel low-byte/high-byte order.

	  Local-header version:

	  Value		Size		Description
	  -----		----		-----------
  (OS/2)  0x0009	Short		tag for this extra block type
	  TSize		Short		total data size for this block
	  BSize		Long		uncompressed EA data size
	  CType		Short		compression type
	  EACRC		Long		CRC value for uncompressed EA data
	  (var.)	variable	compressed EA data

	  Central-header version:

	  Value		Size		Description
	  -----		----		-----------
  (OS/2)  0x0009	Short		tag for this extra block type
	  TSize		Short		total data size for this block
	  BSize		Long		size of uncompressed local EA data

	  The value of CType is interpreted according to the "compression
	  method" section above; i.e., 0 for stored, 8 for deflated, etc.

	  The OS/2 extended attribute structure (FEA2LIST) is compressed and
	  then stored in its entirety within this structure.  There will only
	  ever be one block of data in the variable-length field.


	 -OS/2 Access Control List Extra Field:
	  ====================================

	  The following is the layout of the OS/2 ACL extra block.
	  (Last Revision 960922)

	  Local-header version:

	  Value		Size		Description
	  -----		----		-----------
  (ACL)   0x4c41	Short		tag for this extra block type
	  TSize		Short		total data size for this block
	  BSize		Long		uncompressed ACL data size
	  CType		Short		compression type
	  EACRC		Long		CRC value for uncompressed ACL data
	  (var.)	variable	compressed ACL data

	  Central-header version:

	  Value		Size		Description
	  -----		----		-----------
  (ACL)   0x4c41	Short		tag for this extra block type
	  TSize		Short		total data size for this block
	  BSize		Long		size of uncompressed local ACL data

	  The value of CType is interpreted according to the "compression
	  method" section above; i.e., 0 for stored, 8 for deflated, etc.

	  The uncompressed ACL data consist of a text header of the form
	  "ACL1:%hX,%hd\n", where the first field is the OS/2 ACCINFO acc_attr
	  member and the second is acc_count, followed by acc_count strings
	  of the form "%s,%hx\n", where the first field is acl_ugname (user
	  group name) and the second acl_access.  This block type will be
	  extended for other operating systems as needed.


	 -Windows NT Security Descriptor Extra Field:
	  ==========================================

	  The following is the layout of the NT Security Descriptor (another
	  type of ACL) extra block.  (Last Revision 960922)

	  Local-header version:

	  Value		Size		Description
	  -----		----		-----------
  (SD)    0x4453	Short		tag for this extra block type
	  TSize		Short		total data size for this block
	  BSize		Long		uncompressed SD data size
	  Version	Byte		version of uncompressed SD data format
	  CType		Short		compression type
	  EACRC		Long		CRC value for uncompressed SD data
	  (var.)	variable	compressed SD data

	  Central-header version:

	  Value		Size		Description
	  -----		----		-----------
  (SD)    0x4453	Short		tag for this extra block type
	  TSize		Short		total data size for this block
	  BSize		Long		size of uncompressed local SD data
	  Version	Byte		version of uncompressed SD data format

	  The value of CType is interpreted according to the "compression
	  method" section above; i.e., 0 for stored, 8 for deflated, etc.
	  Version specifies how the compressed data are to be interpreted
	  and allows for future expansion of this extra field type.  Currently
	  only version 0 is defined.

	  For version 0, the compressed data are to be interpreted as a single
	  valid Windows NT SECURITY_DESCRIPTOR data structure, in self-relative
	  format.


	 -PKWARE VAX/VMS Extra Field:
	  ==========================

	  The following is the layout of PKWARE's VAX/VMS attributes "extra"
	  block.  (Last Revision 12/17/91)

	  Note: all fields stored in Intel low-byte/high-byte order.

	  Value		Size		Description
	  -----		----		-----------
  (VMS)   0x000c        Short           Tag for this "extra" block type
	  TSize         Short           Total Data Size for this block
	  CRC           Long            32-bit CRC for remainder of the block
	  Tag1          Short           VMS attribute tag value #1
	  Size1         Short           Size of attribute #1, in bytes
	  (var.)        Size1           Attribute #1 data
	  .
	  .
	  .
	  TagN          Short           VMS attribute tage value #N
	  SizeN         Short           Size of attribute #N, in bytes
	  (var.)        SizeN           Attribute #N data

	  Rules:

	  1. There will be one or more of attributes present, which will
	     each be preceded by the above TagX & SizeX values.  These
	     values are identical to the ATR$C_XXXX and ATR$S_XXXX constants
	     which are defined in ATR.H under VMS C.  Neither of these values
	     will ever be zero.

	  2. No word alignment or padding is performed.

	  3. A well-behaved PKZIP/VMS program should never produce more than
	     one sub-block with the same TagX value.  Also, there will never
	     be more than one "extra" block of type 0x000c in a particular
	     directory record.


	 -Info-ZIP VMS Extra Field:
	  ========================

	  The following is the layout of Info-ZIP's VMS attributes extra
	  block for VAX or Alpha AXP.  The local-header and central-header
	  versions are identical.  (Last Revision 960922)

	  Value		Size		Description
	  -----		----		-----------
  (VMS2)  0x4d49	Short		tag for this extra block type
	  TSize		Short		total data size for this block
	  ID		Long		block ID
	  Flags		Short		info bytes
	  BSize		Short		uncompressed block size
	  Reserved	Long		(reserved)
	  (var.)	variable	compressed VMS file-attributes block

	  The block ID is one of the following unterminated strings:

		"VFAB"		struct FAB
		"VALL"		struct XABALL
		"VFHC"		struct XABFHC
		"VDAT"		struct XABDAT
		"VRDT"		struct XABRDT
		"VPRO"		struct XABPRO
		"VKEY"		struct XABKEY
		"VMSV"		version (e.g., "V6.1"; truncated at hyphen)
		"VNAM"		reserved

	  The lower three bits of Flags indicate the compression method.  The
	  currently defined methods are:

		0	stored (not compressed)
		1	simple "RLE"
		2	deflated

	  The "RLE" method simply replaces zero-valued bytes with zero-valued
	  bits and non-zero-valued bytes with a "1" bit followed by the byte
	  value.

	  The variable-length compressed data contains only the data corre-
	  sponding to the indicated structure or string.  Typically multiple
	  VMS2 extra fields are present (each with a unique block type).


	 -Info-ZIP Macintosh Extra Field:
	  ==============================

	  The following is the layout of the (old) Info-ZIP resource-fork extra
	  block for Macintosh.  The local-header and central-header versions
	  are identical.  (Last Revision 960922)

	  Value		Size		Description
	  -----		----		-----------
  (Mac)   0x07c8	Short		tag for this extra block type
	  TSize		Short		total data size for this block
	  "JLEE"	beLong		extra-field signature
	  FInfo		16 bytes	Macintosh FInfo structure
	  CrDat		beLong		HParamBlockRec fileParam.ioFlCrDat
	  MdDat		beLong		HParamBlockRec fileParam.ioFlMdDat
	  Flags		beLong		info bits
	  DirID		beLong		HParamBlockRec fileParam.ioDirID
	  VolName	28 bytes	volume name (optional)

	  All fields but the first two are in native Macintosh format
	  (big-endian Motorola order, not little-endian Intel).  The least
	  significant bit of Flags is 1 if the file is a data fork, 0 other-
	  wise.  In addition, if this extra field is present, the filename
	  has an extra 'd' or 'r' appended to indicate data fork or resource
	  fork.  The 28-byte VolName field may be omitted.


	 -ZipIt Macintosh Extra Field:
	  ===========================

	  The following is the layout of the ZipIt extra block for Macintosh.
	  The local-header and central-header versions are identical.
	  (Last Revision 970130)

	  Value		Size		Description
	  -----		----		-----------
  (Mac2)  0x2605	Short		tag for this extra block type
	  TSize		Short		total data size for this block
	  "ZPIT"	beLong		extra-field signature
	  FnLen		Byte		length of FileName
	  FileName	variable	full Macintosh filename
	  FileType	beLong		four-byte Mac file type string
	  Creator	beLong		four-byte Mac creator string


	 -Acorn SparkFS Extra Field:
	  =========================

	  The following is the layout of David Pilling's SparkFS extra block
	  for Acorn RISC OS.  The local-header and central-header versions are
	  identical.  (Last Revision 960922)

	  Value		Size		Description
	  -----		----		-----------
  (Acorn) 0x4341	Short		tag for this extra block type
	  TSize		Short		total data size for this block
	  "ARC0"	Long		extra-field signature
	  LoadAddr	Long		load address or file type
	  ExecAddr	Long		exec address
	  Attr		Long		file permissions
	  Zero		Long		reserved; always zero

	  The following bits of Attr are associated with the given file
	  permissions:

		bit 0		user-writable ('W')
		bit 1		user-readable ('R')
		bit 2		reserved
		bit 3		locked ('L')
		bit 4		publicly writable ('w')
		bit 5		publicly readable ('r')
		bit 6		reserved
		bit 7		reserved


	 -VM/CMS Extra Field:
	  ==================

	  The following is the layout of the file-attributes extra block for
	  VM/CMS.  The local-header and central-header versions are
	  identical.  (Last Revision 960922)

	  Value		Size		Description
	  -----		----		-----------
 (VM/CMS) 0x4704	Short		tag for this extra block type
	  TSize		Short		total data size for this block
	  flData	variable	file attributes data

	  flData is an uncompressed fldata_t struct.


	 -MVS Extra Field:
	  ===============

	  The following is the layout of the file-attributes extra block for
	  MVS.  The local-header and central-header versions are identical.
	  (Last Revision 960922)

	  Value		Size		Description
	  -----		----		-----------
  (MVS)   0x470f	Short		tag for this extra block type
	  TSize		Short		total data size for this block
	  flData	variable	file attributes data

	  flData is an uncompressed fldata_t struct.


	 -Extended Timestamp Extra Field:
	  ==============================

	  The following is the layout of the extended-timestamp extra block.
	  (Last Revision 970118)

	  Local-header version:

	  Value		Size		Description
	  -----		----		-----------
  (time)  0x5455	Short		tag for this extra block type
	  TSize		Short		total data size for this block
	  Flags		Byte		info bits
	  (ModTime)	Long		time of last modification (UTC/GMT)
	  (AcTime)	Long		time of last access (UTC/GMT)
	  (CrTime)	Long		time of original creation (UTC/GMT)

	  Central-header version:

	  Value		Size		Description
	  -----		----		-----------
  (time)  0x5455	Short		tag for this extra block type
	  TSize		Short		total data size for this block
	  Flags		Byte		info bits (refers to local header!)
	  (ModTime)	Long		time of last modification (UTC/GMT)

	  The central-header extra field contains the modification time only,
	  or no timestamp at all.  TSize is used to flag its presence or
	  absence.  But note:

	      If "Flags" indicates that Modtime is present in the local header
	      field, it MUST be present in the central header field, too!
	      This correspondence is required because the modification time
	      value may be used to support trans-timezone freshening and
	      updating operations with zip archives.

	  The time values are in standard Unix signed-long format, indicating
	  the number of seconds since 1 January 1970 00:00:00.  The times
	  are relative to Coordinated Universal Time (UTC), also sometimes
	  referred to as Greenwich Mean Time (GMT).  To convert to local time,
	  the software must know the local timezone offset from UTC/GMT.

	  The lower three bits of Flags in both headers indicate which time-
	  stamps are present in the LOCAL extra field:

		bit 0		if set, modification time is present
		bit 1		if set, access time is present
		bit 2		if set, creation time is present
		bits 3-7	reserved for additional timestamps; not set

	  Those times that are present will appear in the order indicated, but
	  any combination of times may be omitted.  (Creation time may be
	  present without access time, for example.)  TSize should equal
	  (1 + 4*(number of set bits in Flags)), as the block is currently
	  defined.  Other timestamps may be added in the future.


	 -Info-ZIP Unix Extra Field (type 1):
	  ==================================

	  The following is the layout of the old Info-ZIP extra block for
	  Unix.  It has been replaced by the extended-timestamp extra block
	  (0x5455) and the Unix type 2 extra block (0x7855).
	  (Last Revision 970118)

	  Local-header version:

	  Value		Size		Description
	  -----		----		-----------
  (Unix1) 0x5855	Short		tag for this extra block type
	  TSize		Short		total data size for this block
	  ModTime	Long		time of last modification (UTC/GMT)
	  AcTime	Long		time of last access (UTC/GMT)
	  UID		Short		Unix user ID
	  GID		Short		Unix group ID

	  Central-header version:

	  Value		Size		Description
	  -----		----		-----------
  (Unix1) 0x5855	Short		tag for this extra block type
	  TSize		Short		total data size for this block
	  ModTime	Long		time of last modification (GMT/UTC)
	  AcTime	Long		time of last access (GMT/UTC)

	  The file modification and access times are in standard Unix signed-
	  long format, indicating the number of seconds since 1 January 1970
	  00:00:00.  The times are relative to Coordinated Universal Time
	  (UTC), also sometimes referred to as Greenwich Mean Time (GMT).  To
	  convert to local time, the software must know the local timezone
	  offset from UTC/GMT.  The modification time may be used by non-Unix
	  systems to support inter-timezone freshening and updating of zip
	  archives.

	  The local-header extra block may optionally contain UID and GID
	  info for the file.  The local-header TSize value is the only
	  indication of this.  Note that Unix UIDs and GIDs are usually
	  specific to a particular machine, and they generally require root
	  access to restore.

	  This extra field type is obsolete, but it has been in use since
	  mid-1994.  Therefore future archiving software should continue to
	  support it.  Some guidelines:

	      An archive member should either contain the old "Unix1"
	      extra field block or the new extra field types "time" and/or
	      "Unix2".

	      If both the old "Unix1" block type and one or both of the new
	      block types "time" and "Unix2" are found, the "Unix1" block
	      should be considered invalid and ignored.

	      Unarchiving software should recognize both old and new extra
	      field block types, but the info from new types overrides the
	      old "Unix1" field.

	      Archiving software should recognize "Unix1" extra fields for
	      timestamp comparison but never create it for updated, freshened
	      or new archive members.  When copying existing members to a new
	      archive, any "Unix1" extra field blocks should be converted to
	      the new "time" and/or "Unix2" types.


	 -Info-ZIP Unix Extra Field (type 2):
	  ==================================

	  The following is the layout of the new Info-ZIP extra block for
	  Unix.  (Last Revision 960922)

	  Local-header version:

	  Value		Size		Description
	  -----		----		-----------
  (Unix2) 0x7855	Short		tag for this extra block type
	  TSize		Short		total data size for this block
	  UID		Short		Unix user ID
	  GID		Short		Unix group ID

	  Central-header version:

	  Value		Size		Description
	  -----		----		-----------
  (Unix2) 0x7855	Short		tag for this extra block type
	  TSize		Short		total data size for this block

	  The data size of the central-header version is zero; it is used
	  solely as a flag that UID/GID info is present in the local-header
	  extra field.  If additional fields are ever added to the local
	  version, the central version may be extended to indicate this.

	  Note that Unix UIDs and GIDs are usually specific to a particular
	  machine, and they generally require root access to restore.


	 -ASi Unix Extra Field:
	  ====================

	  The following is the layout of the ASi extra block for Unix.  The
	  local-header and central-header versions are identical.
	  (Last Revision 960916)

	  Value		Size		Description
	  -----		----		-----------
  (Unix3) 0x756e	Short		tag for this extra block type
	  TSize		Short		total data size for this block
	  CRC		Long		CRC-32 of the remaining data
	  Mode		Short		file permissions
	  SizDev	Long		symlink'd size OR major/minor dev num
	  UID		Short		user ID
	  GID		Short		group ID
	  (var.)	variable	symbolic link filename

	  Mode is the standard Unix st_mode field from struct stat, containing
	  user/group/other permissions, setuid/setgid and symlink info, etc.

	  If Mode indicates that this file is a symbolic link, SizDev is the
	  size of the file to which the link points.  Otherwise, if the file
	  is a device, SizDev contains the standard Unix st_rdev field from
	  struct stat (includes the major and minor numbers of the device).
	  SizDev is undefined in other cases.

	  If Mode indicates that the file is a symbolic link, the final field
	  will be the name of the file to which the link points.  The file-
	  name length can be inferred from TSize.

	  [Note that TSize may incorrectly refer to the data size not counting
	   the CRC; i.e., it may be four bytes too small.]


	 -BeOS Extra Field:
	  ================

	  The following is the layout of the file-attributes extra block for
	  BeOS.  (Last Revision 970311)

	  Local-header version:

	  Value		Size		Description
	  -----		----		-----------
  (BeOS)  0x6542	Short		tag for this extra block type
	  TSize		Short		total data size for this block
	  Type		Long		file type
	  Creator	Long		file creator

	  Type and Creator are "longtext" in native BeOS code (that is, un-
	  signed longs that are typically readable as 4-byte text strings).
	  This will change during the filesystem rewrite for BeOS DR9 (expected
	  in spring 1997), probably as follows:

	  Value		Size		Description
	  -----		----		-----------
  (BeOS)  0x6542	Short		tag for this extra block type
	  TSize		Short		total data size for this block
	  BSize		Long		uncompressed file attribute data size
	  CType		Short		compression type
	  CRC		Long		CRC value for uncompressed file attribs
	  Attribs	variable	compressed file attribute data

	  The local extra block is similar to OS/2's since OS/2 EAs are similar
	  to the file attributes planned for BeOS 1.1DR9, but the implementation
	  will be different.

	  Central-header version:

	  Value		Size		Description
	  -----		----		-----------
  (BeOS)  0x6542	Short		tag for this extra block type
	  TSize		Short		total data size for this block
	  BSize		Long		size of local EF block data


	 -SMS/QDOS Extra Field:
	  ====================

	  The following is the layout of the file-attributes extra block for
	  SMS/QDOS.  The local-header and central-header versions are identical.
	  (Last Revision 960929)

	  Value		Size		Description
	  -----		----		-----------
  (QDOS)  0xfb4a	Short		tag for this extra block type
	  TSize		Short		total data size for this block
	  LongID	Long		extra-field signature
	  (ExtraID)	Long		additional signature/flag bytes
	  QDirect	64 bytes	qdirect structure

	  LongID may be "QZHD" or "QDOS".  In the latter case, ExtraID will
	  be present.  Its first three bytes are "02\0"; the last byte is
	  currently undefined.

	  QDirect contains the file's uncompressed directory info (qdirect
	  struct).  Its elements are in native (big-endian) format:

	  d_length	beLong		file length
	  d_access	byte		file access type
	  d_type	byte		file type
	  d_datalen	beLong		data length
	  d_reserved	beLong		unused
	  d_szname	beShort		size of filename
	  d_name	36 bytes	filename
	  d_update	beLong		time of last update
	  d_refdate	beLong		file version number
	  d_backup	beLong		time of last backup (archive date)


	 -AOS/VS Extra Field:
	  ==================

	  The following is the layout of the extra block for Data General
	  AOS/VS.  The local-header and central-header versions are identical.
	  (Last Revision 961125)

	  Value		Size		Description
	  -----		----		-----------
  (AOSVS) 0x5356	Short		tag for this extra block type
	  TSize		Short		total data size for this block
	  "FCI\0"	Long		extra-field signature
	  Version	Byte		version of AOS/VS extra block (10 = 1.0)
	  Fstat		variable	fstat packet
	  AclBuf	variable	raw ACL data ($MXACL bytes)

	  Fstat contains the file's uncompressed fstat packet, which is one of
	  the following:

		normal fstat packet		(P_FSTAT struct)
		DIR/CPD fstat packet		(P_FSTAT_DIR struct)
		unit (device) fstat packet	(P_FSTAT_UNIT struct)
		IPC file fstat packet		(P_FSTAT_IPC struct)

	  AclBuf contains the raw ACL data; its length is $MXACL.


         -FWKCS MD5 Extra Field:
          =====================

	  The following is the layout of the optional extra block used by the
	  FWKCS utility.  There is no local-header version; the following
	  applies only to the central header.  (Last Revision 961207)

	  Central-header version:

	  Value		Size		Description
	  -----		----		-----------
  (MD5)   0x4b46	Short		tag for this extra block type
	  TSize		Short		total data size for this block (19)
	  "MD5"		3 bytes		extra-field signature
	  MD5hash	16 bytes	128-bit MD5 hash of uncompressed data

	  The MD5 hash in this extra block is used to automatically identify
	  files independent of their filenames; it is an an enhanced contents-
	  signature.  Adding or removing this block should preserve the PKWARE
	  AV (Authenticity Verification) signature.

	  ``The MD5 algorithm is being placed in the public domain for review
	  and possible adoption as a standard.'' (Ron Rivest, MIT Laboratory
	  for Computer Science and RSA Data Security, Inc., April 1992, RFC
	  1321, 11.76-77).  FWKCS is a trademark of Frederick W. Kantor.



      file comment: (Variable)

	  The comment for this file.

      number of this disk: (2 bytes)

	  The number of this disk, which contains central
	  directory end record.

      number of the disk with the start of the central directory: (2 bytes)

	  The number of the disk on which the central
	  directory starts.

      total number of entries in the central dir on this disk: (2 bytes)

	  The number of central directory entries on this disk.

      total number of entries in the central dir: (2 bytes)

	  The total number of files in the zipfile.


      size of the central directory: (4 bytes)

	  The size (in bytes) of the entire central directory.

      offset of start of central directory with respect to
      the starting disk number:  (4 bytes)

	  Offset of the start of the central direcory on the
	  disk on which the central directory starts.

      zipfile comment length: (2 bytes)

	  The length of the comment for this zipfile.

      zipfile comment: (Variable)

	  The comment for this zipfile.


  D.  General notes:

      1)  All fields unless otherwise noted are unsigned and stored
	  in Intel low-byte:high-byte, low-word:high-word order.

      2)  String fields are not null terminated, since the
	  length is given explicitly.

      3)  Local headers should not span disk boundries.  Also, even
	  though the central directory can span disk boundries, no
	  single record in the central directory should be split
	  across disks.

      4)  The entries in the central directory may not necessarily
	  be in the same order that files appear in the zipfile.

UnShrinking - Method 1
----------------------

Shrinking is a Dynamic Ziv-Lempel-Welch compression algorithm
with partial clearing.  The initial code size is 9 bits, and
the maximum code size is 13 bits.  Shrinking differs from
conventional Dynamic Ziv-Lempel-Welch implementations in several
respects:

1)  The code size is controlled by the compressor, and is not
    automatically increased when codes larger than the current
    code size are created (but not necessarily used).  When
    the decompressor encounters the code sequence 256
    (decimal) followed by 1, it should increase the code size
    read from the input stream to the next bit size.  No
    blocking of the codes is performed, so the next code at
    the increased size should be read from the input stream
    immediately after where the previous code at the smaller
    bit size was read.  Again, the decompressor should not
    increase the code size used until the sequence 256,1 is
    encountered.

2)  When the table becomes full, total clearing is not
    performed.  Rather, when the compresser emits the code
    sequence 256,2 (decimal), the decompressor should clear
    all leaf nodes from the Ziv-Lempel tree, and continue to
    use the current code size.  The nodes that are cleared
    from the Ziv-Lempel tree are then re-used, with the lowest
    code value re-used first, and the highest code value
    re-used last.  The compressor can emit the sequence 256,2
    at any time.



Expanding - Methods 2-5
-----------------------

The Reducing algorithm is actually a combination of two
distinct algorithms.  The first algorithm compresses repeated
byte sequences, and the second algorithm takes the compressed
stream from the first algorithm and applies a probabilistic
compression method.

The probabilistic compression stores an array of 'follower
sets' S(j), for j=0 to 255, corresponding to each possible
ASCII character.  Each set contains between 0 and 32
characters, to be denoted as S(j)[0],...,S(j)[m], where m<32.
The sets are stored at the beginning of the data area for a
Reduced file, in reverse order, with S(255) first, and S(0)
last.

The sets are encoded as { N(j), S(j)[0],...,S(j)[N(j)-1] },
where N(j) is the size of set S(j).  N(j) can be 0, in which
case the follower set for S(j) is empty.  Each N(j) value is
encoded in 6 bits, followed by N(j) eight bit character values
corresponding to S(j)[0] to S(j)[N(j)-1] respectively.  If
N(j) is 0, then no values for S(j) are stored, and the value
for N(j-1) immediately follows.

Immediately after the follower sets, is the compressed data
stream.  The compressed data stream can be interpreted for the
probabilistic decompression as follows:


let Last-Character <- 0.
loop until done
    if the follower set S(Last-Character) is empty then
	read 8 bits from the input stream, and copy this
	value to the output stream.
    otherwise if the follower set S(Last-Character) is non-empty then
	read 1 bit from the input stream.
	if this bit is not zero then
	    read 8 bits from the input stream, and copy this
	    value to the output stream.
	otherwise if this bit is zero then
	    read B(N(Last-Character)) bits from the input
	    stream, and assign this value to I.
	    Copy the value of S(Last-Character)[I] to the
	    output stream.

    assign the last value placed on the output stream to
    Last-Character.
end loop


B(N(j)) is defined as the minimal number of bits required to
encode the value N(j)-1.


The decompressed stream from above can then be expanded to
re-create the original file as follows:


let State <- 0.

loop until done
    read 8 bits from the input stream into C.
    case State of
	0:  if C is not equal to DLE (144 decimal) then
		copy C to the output stream.
	    otherwise if C is equal to DLE then
		let State <- 1.

	1:  if C is non-zero then
		let V <- C.
		let Len <- L(V)
		let State <- F(Len).
	    otherwise if C is zero then
		copy the value 144 (decimal) to the output stream.
		let State <- 0

	2:  let Len <- Len + C
	    let State <- 3.

	3:  move backwards D(V,C) bytes in the output stream
	    (if this position is before the start of the output
	    stream, then assume that all the data before the
	    start of the output stream is filled with zeros).
	    copy Len+3 bytes from this position to the output stream.
	    let State <- 0.
    end case
end loop


The functions F,L, and D are dependent on the 'compression
factor', 1 through 4, and are defined as follows:

For compression factor 1:
    L(X) equals the lower 7 bits of X.
    F(X) equals 2 if X equals 127 otherwise F(X) equals 3.
    D(X,Y) equals the (upper 1 bit of X) * 256 + Y + 1.
For compression factor 2:
    L(X) equals the lower 6 bits of X.
    F(X) equals 2 if X equals 63 otherwise F(X) equals 3.
    D(X,Y) equals the (upper 2 bits of X) * 256 + Y + 1.
For compression factor 3:
    L(X) equals the lower 5 bits of X.
    F(X) equals 2 if X equals 31 otherwise F(X) equals 3.
    D(X,Y) equals the (upper 3 bits of X) * 256 + Y + 1.
For compression factor 4:
    L(X) equals the lower 4 bits of X.
    F(X) equals 2 if X equals 15 otherwise F(X) equals 3.
    D(X,Y) equals the (upper 4 bits of X) * 256 + Y + 1.


Imploding - Method 6
--------------------

The Imploding algorithm is actually a combination of two distinct
algorithms.  The first algorithm compresses repeated byte
sequences using a sliding dictionary.  The second algorithm is
used to compress the encoding of the sliding dictionary ouput,
using multiple Shannon-Fano trees.

The Imploding algorithm can use a 4K or 8K sliding dictionary
size. The dictionary size used can be determined by bit 1 in the
general purpose flag word; a 0 bit indicates a 4K dictionary
while a 1 bit indicates an 8K dictionary.

The Shannon-Fano trees are stored at the start of the compressed
file. The number of trees stored is defined by bit 2 in the
general purpose flag word; a 0 bit indicates two trees stored, a
1 bit indicates three trees are stored.  If 3 trees are stored,
the first Shannon-Fano tree represents the encoding of the
Literal characters, the second tree represents the encoding of
the Length information, the third represents the encoding of the
Distance information.  When 2 Shannon-Fano trees are stored, the
Length tree is stored first, followed by the Distance tree.

The Literal Shannon-Fano tree, if present is used to represent
the entire ASCII character set, and contains 256 values.  This
tree is used to compress any data not compressed by the sliding
dictionary algorithm.  When this tree is present, the Minimum
Match Length for the sliding dictionary is 3.  If this tree is
not present, the Minimum Match Length is 2.

The Length Shannon-Fano tree is used to compress the Length part
of the (length,distance) pairs from the sliding dictionary
output.  The Length tree contains 64 values, ranging from the
Minimum Match Length, to 63 plus the Minimum Match Length.

The Distance Shannon-Fano tree is used to compress the Distance
part of the (length,distance) pairs from the sliding dictionary
output. The Distance tree contains 64 values, ranging from 0 to
63, representing the upper 6 bits of the distance value.  The
distance values themselves will be between 0 and the sliding
dictionary size, either 4K or 8K.

The Shannon-Fano trees themselves are stored in a compressed
format. The first byte of the tree data represents the number of
bytes of data representing the (compressed) Shannon-Fano tree
minus 1.  The remaining bytes represent the Shannon-Fano tree
data encoded as:

    High 4 bits: Number of values at this bit length + 1. (1 - 16)
    Low  4 bits: Bit Length needed to represent value + 1. (1 - 16)

The Shannon-Fano codes can be constructed from the bit lengths
using the following algorithm:

1)  Sort the Bit Lengths in ascending order, while retaining the
    order of the original lengths stored in the file.

2)  Generate the Shannon-Fano trees:

    Code <- 0
    CodeIncrement <- 0
    LastBitLength <- 0
    i <- number of Shannon-Fano codes - 1   (either 255 or 63)

    loop while i >= 0
	Code = Code + CodeIncrement
	if BitLength(i) <> LastBitLength then
	    LastBitLength=BitLength(i)
	    CodeIncrement = 1 shifted left (16 - LastBitLength)
	ShannonCode(i) = Code
	i <- i - 1
    end loop


3)  Reverse the order of all the bits in the above ShannonCode()
    vector, so that the most significant bit becomes the least
    significant bit.  For example, the value 0x1234 (hex) would
    become 0x2C48 (hex).

4)  Restore the order of Shannon-Fano codes as originally stored
    within the file.

Example:

    This example will show the encoding of a Shannon-Fano tree
    of size 8.  Notice that the actual Shannon-Fano trees used
    for Imploding are either 64 or 256 entries in size.

Example:   0x02, 0x42, 0x01, 0x13

    The first byte indicates 3 values in this table.  Decoding the
    bytes:
	    0x42 = 5 codes of 3 bits long
	    0x01 = 1 code  of 2 bits long
	    0x13 = 2 codes of 4 bits long

    This would generate the original bit length array of:
    (3, 3, 3, 3, 3, 2, 4, 4)

    There are 8 codes in this table for the values 0 thru 7.  Using the
    algorithm to obtain the Shannon-Fano codes produces:

				  Reversed     Order     Original
Val  Sorted   Constructed Code      Value     Restored    Length
---  ------   -----------------   --------    --------    ------
0:     2      1100000000000000        11       101          3
1:     3      1010000000000000       101       001          3
2:     3      1000000000000000       001       110          3
3:     3      0110000000000000       110       010          3
4:     3      0100000000000000       010       100          3
5:     3      0010000000000000       100        11          2
6:     4      0001000000000000      1000      1000          4
7:     4      0000000000000000      0000      0000          4


The values in the Val, Order Restored and Original Length columns
now represent the Shannon-Fano encoding tree that can be used for
decoding the Shannon-Fano encoded data.  How to parse the
variable length Shannon-Fano values from the data stream is beyond the
scope of this document.  (See the references listed at the end of
this document for more information.)  However, traditional decoding
schemes used for Huffman variable length decoding, such as the
Greenlaw algorithm, can be succesfully applied.

The compressed data stream begins immediately after the
compressed Shannon-Fano data.  The compressed data stream can be
interpreted as follows:

loop until done
    read 1 bit from input stream.

    if this bit is non-zero then       (encoded data is literal data)
	if Literal Shannon-Fano tree is present
	    read and decode character using Literal Shannon-Fano tree.
	otherwise
	    read 8 bits from input stream.
	copy character to the output stream.
    otherwise                   (encoded data is sliding dictionary match)
	if 8K dictionary size
	    read 7 bits for offset Distance (lower 7 bits of offset).
	otherwise
	    read 6 bits for offset Distance (lower 6 bits of offset).

	using the Distance Shannon-Fano tree, read and decode the
	  upper 6 bits of the Distance value.

	using the Length Shannon-Fano tree, read and decode
	  the Length value.

	Length <- Length + Minimum Match Length

	if Length = 63 + Minimum Match Length
	    read 8 bits from the input stream,
	    add this value to Length.

	move backwards Distance+1 bytes in the output stream, and
	copy Length characters from this position to the output
	stream.  (if this position is before the start of the output
	stream, then assume that all the data before the start of
	the output stream is filled with zeros).
end loop

Tokenizing - Method 7
--------------------

This method is not used by PKZIP.

Deflating - Method 8
-----------------

The Deflate algorithm is similar to the Implode algorithm using
a sliding dictionary of up to 32K with secondary compression
from Huffman/Shannon-Fano codes.

The compressed data is stored in blocks with a header describing
the block and the Huffman codes used in the data block.  The header
format is as follows:

   Bit 0: Last Block bit     This bit is set to 1 if this is the last
			     compressed block in the data.
   Bits 1-2: Block type
      00 (0) - Block is stored - All stored data is byte aligned.
	       Skip bits until next byte, then next word = block length,
	       followed by the ones compliment of the block length word.
	       Remaining data in block is the stored data.

      01 (1) - Use fixed Huffman codes for literal and distance codes.
	       Lit Code    Bits             Dist Code   Bits
	       ---------   ----             ---------   ----
		 0 - 143    8                 0 - 31      5
	       144 - 255    9
	       256 - 279    7
	       280 - 287    8

	       Literal codes 286-287 and distance codes 30-31 are never
	       used but participate in the huffman construction.

      10 (2) - Dynamic Huffman codes.  (See expanding Huffman codes)

      11 (3) - Reserved - Flag a "Error in compressed data" if seen.

Expanding Huffman Codes
-----------------------
If the data block is stored with dynamic Huffman codes, the Huffman
codes are sent in the following compressed format:

   5 Bits: # of Literal codes sent - 257 (257 - 286)
	   All other codes are never sent.
   5 Bits: # of Dist codes - 1           (1 - 32)
   4 Bits: # of Bit Length codes - 4     (4 - 19)

The Huffman codes are sent as bit lengths and the codes are built as
described in the implode algorithm.  The bit lengths themselves are
compressed with Huffman codes.  There are 19 bit length codes:

   0 - 15: Represent bit lengths of 0 - 15
       16: Copy the previous bit length 3 - 6 times.
	   The next 2 bits indicate repeat length (0 = 3, ... ,3 = 6)
	      Example:  Codes 8, 16 (+2 bits 11), 16 (+2 bits 10) will
			expand to 12 bit lengths of 8 (1 + 6 + 5)
       17: Repeat a bit length of 0 for 3 - 10 times. (3 bits of length)
       18: Repeat a bit length of 0 for 11 - 138 times (7 bits of length)

The lengths of the bit length codes are sent packed 3 bits per value
(0 - 7) in the following order:

   16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15

The Huffman codes should be built as described in the Implode algorithm
except codes are assigned starting at the shortest bit length, i.e. the
shortest code should be all 0's rather than all 1's.  Also, codes with
a bit length of zero do not participate in the tree construction.  The
codes are then used to decode the bit lengths for the literal and distance
tables.

The bit lengths for the literal tables are sent first with the number
of entries sent described by the 5 bits sent earlier.  There are up
to 286 literal characters; the first 256 represent the respective 8
bit character, code 256 represents the End-Of-Block code, the remaining
29 codes represent copy lengths of 3 thru 258.  There are up to 30
distance codes representing distances from 1 thru 32k as described
below.

			     Length Codes
			     ------------
      Extra             Extra              Extra              Extra
 Code Bits Length  Code Bits Lengths  Code Bits Lengths  Code Bits Length(s)
 ---- ---- ------  ---- ---- -------  ---- ---- -------  ---- ---- ---------
  257   0     3     265   1   11,12    273   3   35-42    281   5  131-162
  258   0     4     266   1   13,14    274   3   43-50    282   5  163-194
  259   0     5     267   1   15,16    275   3   51-58    283   5  195-226
  260   0     6     268   1   17,18    276   3   59-66    284   5  227-257
  261   0     7     269   2   19-22    277   4   67-82    285   0    258
  262   0     8     270   2   23-26    278   4   83-98
  263   0     9     271   2   27-30    279   4   99-114
  264   0    10     272   2   31-34    280   4  115-130

			    Distance Codes
			    --------------
      Extra           Extra             Extra               Extra
 Code Bits Dist  Code Bits  Dist   Code Bits Distance  Code Bits Distance
 ---- ---- ----  ---- ---- ------  ---- ---- --------  ---- ---- --------
   0   0    1      8   3   17-24    16    7  257-384    24   11  4097-6144
   1   0    2      9   3   25-32    17    7  385-512    25   11  6145-8192
   2   0    3     10   4   33-48    18    8  513-768    26   12  8193-12288
   3   0    4     11   4   49-64    19    8  769-1024   27   12 12289-16384
   4   1   5,6    12   5   65-96    20    9 1025-1536   28   13 16385-24576
   5   1   7,8    13   5   97-128   21    9 1537-2048   29   13 24577-32768
   6   2   9-12   14   6  129-192   22   10 2049-3072
   7   2  13-16   15   6  193-256   23   10 3073-4096

The compressed data stream begins immediately after the
compressed header data.  The compressed data stream can be
interpreted as follows:

do
   read header from input stream.

   if stored block
      skip bits until byte aligned
      read count and 1's compliment of count
      copy count bytes data block
   otherwise
      loop until end of block code sent
	 decode literal character from input stream
	 if literal < 256
	    copy character to the output stream
	 otherwise
	    if literal = end of block
	       break from loop
	    otherwise
	       decode distance from input stream

	       move backwards distance bytes in the output stream, and
	       copy length characters from this position to the output
	       stream.
      end loop
while not last block

if data descriptor exists
   skip bits until byte aligned
   read crc and sizes
endif

Decryption
----------

The encryption used in PKZIP was generously supplied by Roger
Schlafly.  PKWARE is grateful to Mr. Schlafly for his expert
help and advice in the field of data encryption.

PKZIP encrypts the compressed data stream.  Encrypted files must
be decrypted before they can be extracted.

Each encrypted file has an extra 12 bytes stored at the start of
the data area defining the encryption header for that file.  The
encryption header is originally set to random values, and then
itself encrypted, using three, 32-bit keys.  The key values are
initialized using the supplied encryption password.  After each byte
is encrypted, the keys are then updated using pseudo-random number
generation techniques in combination with the same CRC-32 algorithm
used in PKZIP and described elsewhere in this document.

The following is the basic steps required to decrypt a file:

1) Initialize the three 32-bit keys with the password.
2) Read and decrypt the 12-byte encryption header, further
   initializing the encryption keys.
3) Read and decrypt the compressed data stream using the
   encryption keys.


Step 1 - Initializing the encryption keys
-----------------------------------------

Key(0) <- 305419896
Key(1) <- 591751049
Key(2) <- 878082192

loop for i <- 0 to length(password)-1
    update_keys(password(i))
end loop


Where update_keys() is defined as:


update_keys(char):
  Key(0) <- crc32(key(0),char)
  Key(1) <- Key(1) + (Key(0) & 000000ffH)
  Key(1) <- Key(1) * 134775813 + 1
  Key(2) <- crc32(key(2),key(1) >> 24)
end update_keys


Where crc32(old_crc,char) is a routine that given a CRC value and a
character, returns an updated CRC value after applying the CRC-32
algorithm described elsewhere in this document.


Step 2 - Decrypting the encryption header
-----------------------------------------

The purpose of this step is to further initialize the encryption
keys, based on random data, to render a plaintext attack on the
data ineffective.


Read the 12-byte encryption header into Buffer, in locations
Buffer(0) thru Buffer(11).

loop for i <- 0 to 11
    C <- buffer(i) ^ decrypt_byte()
    update_keys(C)
    buffer(i) <- C
end loop


Where decrypt_byte() is defined as:


unsigned char decrypt_byte()
    local unsigned short temp
    temp <- Key(2) | 2
    decrypt_byte <- (temp * (temp ^ 1)) >> 8
end decrypt_byte


After the header is decrypted,  the last 1 or 2 bytes in Buffer
should be the high-order word/byte of the CRC for the file being
decrypted, stored in Intel low-byte/high-byte order, or the high-order
byte of the file time if bit 3 of the general purpose bit flag is set.
Versions of PKZIP prior to 2.0 used a 2 byte CRC check; a 1 byte CRC check is
used on versions after 2.0.  This can be used to test if the password
supplied is correct or not.


Step 3 - Decrypting the compressed data stream
----------------------------------------------

The compressed data stream can be decrypted as follows:


loop until done
    read a charcter into C
    Temp <- C ^ decrypt_byte()
    update_keys(temp)
    output Temp
end loop


In addition to the above mentioned contributors to PKZIP and PKUNZIP,
I would like to extend special thanks to Robert Mahoney for suggesting
the extension .ZIP for this software.


References:

    Fiala, Edward R., and Greene, Daniel H., "Data compression with
       finite windows",  Communications of the ACM, Volume 32, Number 4,
       April 1989, pages 490-505.

    Held, Gilbert, "Data Compression, Techniques and Applications,
		    Hardware and Software Considerations",
       John Wiley & Sons, 1987.

    Huffman, D.A., "A method for the construction of minimum-redundancy
       codes", Proceedings of the IRE, Volume 40, Number 9, September 1952,
       pages 1098-1101.

    Nelson, Mark, "LZW Data Compression", Dr. Dobbs Journal, Volume 14,
       Number 10, October 1989, pages 29-37.

    Nelson, Mark, "The Data Compression Book",  M&T Books, 1991.

    Storer, James A., "Data Compression, Methods and Theory",
       Computer Science Press, 1988

    Welch, Terry, "A Technique for High-Performance Data Compression",
       IEEE Computer, Volume 17, Number 6, June 1984, pages 8-19.

    Ziv, J. and Lempel, A., "A universal algorithm for sequential data
       compression", Communications of the ACM, Volume 30, Number 6,
       June 1987, pages 520-540.

    Ziv, J. and Lempel, A., "Compression of individual sequences via
       variable-rate coding", IEEE Transactions on Information Theory,
       Volume 24, Number 5, September 1978, pages 530-536.